Class I · High risk
Heparin (Heparin Sodium in 0.9% Sodium Chloride Injection)
Microbial Contamination of Sterile Products; out of limit results obtained for endotoxin testing.
Heparin Sodium and 0.9% Sodium Chloride Injection
Class II — Moderate risk. May cause temporary or reversible harm; serious harm unlikely.
Why it was recalled
Lack of Assurance of Sterility: Specific lot numbers of these products have been identified for potential administration port leakage. The potential for leakage is the result of a manufacturing issue which occurred during the sealing of the closure assembly at the administration port.
Cause type: Sterility / contamination
A product that must be sterile could not be assured sterile, or was contaminated. A top reason for injectables, eye drops and IV products - loss of sterility assurance can lead to serious infections. All sterility / contamination recalls.
What was recalled
Heparin Sodium and 0.9% Sodium Chloride Injection, a) Product code 2B0944, 2000 USP Units, Viaflex Plus Container, 1000mL, (NDC 0338-0433-04), b) Product code 2B0953: 1000 USP Units, Viaflex Plus Container, 500 mL (NDC 0338-0431-03), Baxter, Deerfield, IL 60015
Affected NDCs
0338-0431-03
0338-0433-04
Compare with the code on your package — it is the most precise check available.
Drug: Heparin
Product details
From the FDA NDC directory, for the product codes this recall names. Compare with the label on your package.
| Product | Strength | Form & route | Labeler | Type |
|---|---|---|---|---|
| Heparin Sodium in Sodium Chloride Heparin Sodium NDC 00338-0431 |
200 [USP'U]/100mL | Injection, Solution Intravenous |
Baxter Healthcare Corporation | Rx |
| Heparin Sodium in Sodium Chloride Heparin Sodium NDC 00338-0433 |
200 [USP'U]/100mL | Injection, Solution Intravenous |
Baxter Healthcare Corporation | Rx |
- Recalling firm
- Baxter Healthcare Corp.
- NDC code
- 0338-0433-04
- Origin
- IL, United States
- Initiated by
- Voluntary: Firm initiated
- FDA recall number
- D-626-2013 · FDA notice
Check, then ask. Class II means harm is possible but usually temporary or reversible. Find the lot number on your package; if it matches, ask your pharmacist about a replacement. Do not simply stop a prescribed medication on your own - the gap can be riskier than the recall. This recall is now terminated, which means the firm has finished removing the affected product; anything on pharmacy shelves today should be unaffected.
Other Heparin recalls
See all
Class II · Moderate risk
heparin added to 0.9% sodium chloride
Lack of Assurance of Sterility:Lack of validation data for sanitization cycles
Class II · Moderate risk
Neonatal TPN Starter Bag
Lack of Assurance of Sterility:Lack of validation data for sanitization cycles
Class II · Moderate risk
Neonatal TPN Starter Bag
Lack of Assurance of Sterility:Lack of validation data for sanitization cycles
Class II · Moderate risk
Neonatal TPN Starter Bag
Lack of Assurance of Sterility:Lack of validation data for sanitization cycles
Other recalls by Baxter Healthcare Corp.
All 2013 recalls
Class I · High risk
Dextrose Injection
Presence of Particulate Matter: particulate matter identified as stainless steel particles in the solution.
Class I · High risk
0.9% Sodium Chloride Injection USP 500 mL
Presence of particulate matter: Particulates identified as fiberglass
Class II · Moderate risk
Daptomycin
CGMP Deviations
Class II · Moderate risk
Vancomycin Injection
CGMP Deviations
Free recall alerts
Know the day your medication is recalled
Tell us what you take. When FDA posts a recall announcement or classifies a recall for one of your medications, we email you in plain English, with what to check. No account needed.