Sulfamethoxazole and Trimethoprim Tablets
Presence of foreign substance -This recall has been intiated due to the presence of a polyethylene piece on the finished product.
Class III — Low risk. Unlikely to cause harm, but violates FDA regulations.
Labeling: Incorrect instructions; an error in section 5.11 of the patient insert that results in incorrect medical advice. Specifically, the labeling should read "If a severely depressed HDL-C level is detected, fibrate therapy should be withdrawn, and the HDL-C level monitored until it has returned to baseline, and fibrate therapy should not be re-initiated." The labeling for the recalled lots
Cause type: Labeling / mix-up
Wrong label, wrong strength, mixed-up products, or packaging errors. One of the most dangerous causes - you can end up taking the wrong drug or the wrong dose. All labeling / mix-up recalls.
FIBRICOR (fenofibric acid) Tablets, 105 mg, a) 30 count bottle (NDC 13310-102-07), b) 90 count bottle (NDC 13310-102-90), Manufactured for AR SCIENTIFIC, INC, Philadelphia, PA 19124 USA
Compare with the code on your package — it is the most precise check available.
Low risk, still worth a check. Class III means the product is unlikely to cause harm but breaks an FDA rule (often labeling). If your lot matches, your pharmacy will normally swap it; there is no need for alarm. This recall is now terminated, which means the firm has finished removing the affected product; anything on pharmacy shelves today should be unaffected.
Presence of foreign substance -This recall has been intiated due to the presence of a polyethylene piece on the finished product.
Chemical Contamination; benzophenone leached from the product label varnish
Chemical Contamination; benzophenone leached from the product label varnish
Chemical Contamination; benzophenone leached from the product label varnish
Labeling: Label Error On Declared Strength: Trelstar 11.25 mg labeled carton/kit contained a vial labeled as 3.75 mg instead of a vial being labeled as 11.25mg.
Labeling: Wrong Bar Code; Bar code scans as 0.15% Potassium Chloride in 0.9% Sodium Chloride (20 mEq K/liter).
Labeling: Incorrect or Missing Package Insert- Missing text on the product insert in the "Clinical Studies" and "Specific Adverse Events" sections.
Labeling: Not Elsewhere Classified; Due to an error in the manufacturing procedure, a cylinder in liquid withdrawal service was not marked Syphon Tube indicating liquid withdrawal and shipped as a gas withdrawal cylinder.
Free recall alerts
Tell us what you take. When FDA posts a recall announcement or classifies a recall for one of your medications, we email you in plain English, with what to check. No account needed.