Tranexamic Acid USP Tablets
Failed Impurities/Degradation Specifications: Out of specification results obtained for conductivity.
Class III — Low risk. Unlikely to cause harm, but violates FDA regulations.
Failed Impurities/Degradation Specifications: Out of specification results obtained for conductivity.
Cause type: Impurity / degradation
An impurity or degradation product above its limit - other than nitrosamines. Unexpected substances in a batch can make it unsafe or less effective, even when the active ingredient is present. All impurity / degradation recalls.
Lysteda (tranexamic acid) USP Tablets, 650 mg, 30 tablets per bottle, Rx Only, Manufactured for: Amring Pharmaceuticals Inc. Berwyn, PA 19312, NDC 69918-301-30
Compare with the code on your package — it is the most precise check available.
Drug: Tranexamic
From the FDA NDC directory, for the product code this recall names. Compare with the label on your package.
| Product | Strength | Form & route | Labeler | Type |
|---|---|---|---|---|
| Tranexamic Acid NDC 69918-0301 |
650 mg/1 | Tablet Oral |
Nordic Pharma, Inc. | Rx |
Low risk, still worth a check. Class III means the product is unlikely to cause harm but breaks an FDA rule (often labeling). If your lot matches, your pharmacy will normally swap it; there is no need for alarm. This recall is now terminated, which means the firm has finished removing the affected product; anything on pharmacy shelves today should be unaffected.
Failed Impurities/Degradation Specifications: Out of specification results obtained for conductivity.
Presence of Particulate Matter: Piece of metal found in a vial
Labeling: Label Mix-Up; potential for cartons labeled as Tranexamic Acid Injection, USP to contain vials of Amiodarone HCl Injection, USP and cartons labeled as Amiodarone HCl Injection, USP to contain vials of Tranexamic Acid Injection, USP.
Penicillin Cross Contamination: All lots of all products repackaged and distributed between 01/05/12 and 02/12/15 are being recalled because they were repackaged in a facility with penicillin products without adequate separation which could introduce the potential for cross contamination with penicillin.
Presence of Particulate Matter: Particulate matter consistent with delamination of the glass vial container.
Failed Impurities/Degradation Specifications: Out of specification Impurity C (4,5-desisopropylidene topiramate) result observed during routine stability testing at 18 months.
Failed Impurities/Degradation Specifications
Failed Impurities/Degradation Specifications
Failed Impurities/Degradation Specifications
Free recall alerts
Tell us what you take. When FDA posts a recall announcement or classifies a recall for one of your medications, we email you in plain English, with what to check. No account needed.