Fluocinonide
Failed Viscosity Specifications: Out of Specification results, above the specification limit, in viscosity, noted during stability testing.
Class III — Low risk. Unlikely to cause harm, but violates FDA regulations.
Cross contamination with other products: Certain lots of Fluocinonide Cream were found to be contaminated with a small quantity of hydrocortisone-17-valerate.
Cause type: Cross-contamination
Traces of another drug - most often penicillin - got into the product from shared equipment or facilities. Even trace penicillin can trigger a severe allergic reaction in someone who was never meant to receive it. All cross-contamination recalls.
Fluocinonide Cream UPS, 0.05% (Emulsified Base), packaged in 60 g tube, Rx only, Mfd. by: Taro Pharmaceuticals Inc., Brampton, Ontario, Canada, Dist. by Taro Pharmaceuticals U.S.A., Inc., Hawthorne, NY 10532, NDC 51672-1254-3
Compare with the code on your package — it is the most precise check available.
Drug: Fluocinonide
From the FDA NDC directory, for the product code this recall names. Compare with the label on your package.
| Product | Strength | Form & route | Labeler | Type |
|---|---|---|---|---|
| Fluocinonide NDC 51672-1254 |
.5 mg/g | Cream Topical |
Sun Pharmaceutical Industries, Inc. | Rx |
Low risk, still worth a check. Class III means the product is unlikely to cause harm but breaks an FDA rule (often labeling). If your lot matches, your pharmacy will normally swap it; there is no need for alarm. This recall is now terminated, which means the firm has finished removing the affected product; anything on pharmacy shelves today should be unaffected.
Failed Viscosity Specifications: Out of Specification results, above the specification limit, in viscosity, noted during stability testing.
Failed Viscosity Specifications: Out of Specification results, above the specification limit, in viscosity, noted during stability testing.
Failed Viscosity Specifications: Out of Specification results, above the specification limit, in viscosity, noted during stability testing.
cGMP deviations: all products within expiry are being recalled because the firm is discontinuing its stability study program.
cGMP deviations: all products within expiry are being recalled because the firm is discontinuing its stability study program.
Failed Impurities/Degradation Specifications: Out-of-specification results obtained for related impurities and slightly lower than the established level of the Hydrocortisone Assay obtained during stability testing.
Failed Content Uniformity Specifications: Out-of-specification result for the Betamethasone Dipropionate assay of a stability sample
Microbial Contamination of Non-Sterile Products: presence of R. Pickettii bacteria
CGMP deviations.
Free recall alerts
Tell us what you take. When FDA posts a recall announcement or classifies a recall for one of your medications, we email you in plain English, with what to check. No account needed.