Enoxaparin Sodium Injection
Correct Labeled Product Mispack: Bags labeled for Enoxaparin Sodium Injection, 80 mg/0.8 mL, contained Enoxaparin Sodium Injection, 30 mg/0.3 mL
Class III — Low risk. Unlikely to cause harm, but violates FDA regulations.
Labeling: Incorrect or Missing Package Insert: the package insert for the potassium chloride 8 mEq and 10 mEq strength instead of the potassium chloride 10 mEq and 20 mEq strength was packaged with the product.
Cause type: Labeling / mix-up
Wrong label, wrong strength, mixed-up products, or packaging errors. One of the most dangerous causes - you can end up taking the wrong drug or the wrong dose. All labeling / mix-up recalls.
Potassium Chloride, microencapsulated extended-release tablets, 20 mEq, blister card of 30/10 cards in a corrugated shipper, Rx only, Manufactured by Upsher-Smith Laboratories, Inc. Minneapolis, MN 55447 for Sandoz, Inc., Princeton, NJ 08540 Repackaged by Cardinal Health Zanesville, OH 43701
Low risk, still worth a check. Class III means the product is unlikely to cause harm but breaks an FDA rule (often labeling). If your lot matches, your pharmacy will normally swap it; there is no need for alarm. This recall is now terminated, which means the firm has finished removing the affected product; anything on pharmacy shelves today should be unaffected.
Correct Labeled Product Mispack: Bags labeled for Enoxaparin Sodium Injection, 80 mg/0.8 mL, contained Enoxaparin Sodium Injection, 30 mg/0.3 mL
CGMP Deviations - Product was exposed to temperatures outside the product's labeled storage requirements.
CGMP Deviations - Product was exposed to temperatures outside the product's labeled storage requirements.
CGMP Deviations - Product was exposed to temperatures outside the product's labeled storage requirements.
Labeling: Label Error On Declared Strength: Trelstar 11.25 mg labeled carton/kit contained a vial labeled as 3.75 mg instead of a vial being labeled as 11.25mg.
Labeling: Wrong Bar Code; Bar code scans as 0.15% Potassium Chloride in 0.9% Sodium Chloride (20 mEq K/liter).
Labeling: Incorrect or Missing Package Insert- Missing text on the product insert in the "Clinical Studies" and "Specific Adverse Events" sections.
Labeling: Not Elsewhere Classified; Due to an error in the manufacturing procedure, a cylinder in liquid withdrawal service was not marked Syphon Tube indicating liquid withdrawal and shipped as a gas withdrawal cylinder.
Free recall alerts
Tell us what you take. When FDA posts a recall announcement or classifies a recall for one of your medications, we email you in plain English, with what to check. No account needed.