Synjardy XR Tablets
CGMP Deviations: An incorrect detergent was used and the required swab sampling was not performed on a production hopper that had previously been used for a different product.
Class II — Moderate risk. May cause temporary or reversible harm; serious harm unlikely.
CGMP Deviations
Cause type: cGMP deviation
Departures from current Good Manufacturing Practice found in production or during FDA inspection. A broad quality-system cause: the batch was made under conditions that fall short of FDA manufacturing standards. All cgmp deviation recalls.
Metformin Hydrochloride Extended-Release Tablets 1000mg, 90-count bottle. Manufactured by: Glenmark Pharmaceuticals Limited, Pithampur, Madhya Pradesh 454775, India, Manufactured for: Glenmark Pharmaceuticals Inc. USA, Mahwah, NJ 07430. NDC 68462-521-90.
Compare with the code on your package — it is the most precise check available.
Drug: Metformin Category: Diabetes Medication
From the FDA NDC directory, for the product code this recall names. Compare with the label on your package.
| Product | Strength | Form & route | Labeler | Type |
|---|---|---|---|---|
| Metformin Hydrochloride NDC 68462-0521 |
1000 mg/1 | Tablet, Film Coated, Extended Release Oral |
Glenmark Pharmaceuticals INC., USA | Rx |
Check, then ask. Class II means harm is possible but usually temporary or reversible. Find the lot number on your package; if it matches, ask your pharmacist about a replacement. Do not simply stop a prescribed medication on your own - the gap can be riskier than the recall.
CGMP Deviations: An incorrect detergent was used and the required swab sampling was not performed on a production hopper that had previously been used for a different product.
Presence of Foreign Tablets/Capsules.
Presence of Foreign Tablets/Capsules: A Paracetamol 500 mg tablet was found in a 1000-count bottle of Metformin HCL ER Tablets USP, 500 mg.
CGMP Deviations: Detection of N-Nitrosodimethylamine (NDMA) levels in excess of the Acceptable Daily Intake Limit.
Presence of foreign substance: Presence of stainless steel particulates in tablets.
CGMP Deviations: Product quality complaints concerning abnormal texture or consistency (described as grainy, gritty, or sandy) were received.
Failed Impurities/Degradation Specifications: This recall is being initiated due to out-of-specification results total impurities.
Defective container: Preferred Pharmaceuticals received a letter from the manufacturer Glenmark, that the blister packs are not fully sealed and tablets falling out. Preferred Pharmaceuticals purchased the finished product and repackaged the product for sale.
Cross Contamination with Other Products: Testing of reserve samples showed presence of traces of ezetimibe
Free recall alerts
Tell us what you take. When FDA posts a recall announcement or classifies a recall for one of your medications, we email you in plain English, with what to check. No account needed.