PeriGiene
CGMP Deviation; manufactured at the same facility where other products and lots were found to be contaminated.
Class III — Low risk. Unlikely to cause harm, but violates FDA regulations.
Labeling: Incorrect or Missing Lot and/or Exp Date - Product is missing or has illegible lot and expiry codes, as well as defective or cracked caps.
Cause type: Labeling / mix-up
Wrong label, wrong strength, mixed-up products, or packaging errors. One of the most dangerous causes - you can end up taking the wrong drug or the wrong dose. All labeling / mix-up recalls.
Techni-Care Surgical Hand Scrub and Patient Preoperative Skin Preparation (3.0% w/v Chloroxylenol), packaged in a) 4 oz. bottles (NDC 46706-201-01), b) 8 oz bottles (NDC 46706-201-02), c) 16 oz. bottles (NDC 46706-201-03), d) 12 oz. pumpette (NDC 46706-201-05), e) 32 oz. bottles (NDC 46706-201-06), OTC, Care-Tech Laboratories, Inc., St. Louis, MO 63139
Compare with the code on your package — it is the most precise check available.
Drug: Chloroxylenol
Low risk, still worth a check. Class III means the product is unlikely to cause harm but breaks an FDA rule (often labeling). If your lot matches, your pharmacy will normally swap it; there is no need for alarm. This recall is now terminated, which means the firm has finished removing the affected product; anything on pharmacy shelves today should be unaffected.
CGMP Deviation; manufactured at the same facility where other products and lots were found to be contaminated.
CGMP Deviation; manufactured at the same facility where other products and lots were found to be contaminated.
CGMP Deviation; manufactured at the same facility where other products and lots were found to be contaminated.
Microbial Contamination of Non-Sterile Drug Product: The products were found to be contaminated with the bacteria Burkholderia cepecia.
Microbial Contamination of Non-Sterile Drug Product: The products were found to be contaminated with the bacteria Burkholderia cepecia.
Labeling: Label Mix Up- Incorrect back label applied to the product.
Labeling: Label Error on Declared Strength: Some bottles miss a color coded panel where the strength of the product is typically displayed.
Labeling: Label error on declared strength. Package Insert -Error in the Description section of the package insert refers to the strength as 3mg per mL; however it should state 2mg per mL
Labeling: Label error on declared strength. Package Insert -Error in the Description section of the package insert refers to the strength as 3mg per mL; however it should state 2mg per mL
Free recall alerts
Tell us what you take. When FDA posts a recall announcement or classifies a recall for one of your medications, we email you in plain English, with what to check. No account needed.